Products | Perforated Screens
Working Screens in Oblong & Round Holes, Supporting Screens, Wire Nettings,
and all types of Sugar Mill Screens

 

Technical Aspects & Attraction:

  1. Our screens are quite flat, straight and soft annealed for proper and easy fittings on the equipment.
  2. Accurate and uniform perforation.
Most Important: Always use soft annealed screens otherwise hard screen will damage the equipment during operation.

O.E.M Customer:

  1. Our screens are quite flat, straight and soft annealed for proper and easy fittings on the equipment.
  2. Accurate and uniform perforation.

Exports
Regular Exports to South Africa, Mauritius, Brazil, Nepal, Indonesia, Tanzania, Vietnam and European Countries.

Technical

Hole Size

Pitch / Center

Open Area

Material

Thick

Wt. in Sq. Ft.

0.50 mm

1.09 mm

19.60 %

S.S. 304

0.30 mm

0.160 grams

Material Construction of SS 304

-

-

-

C

Mn

Si

Cr

Ni

-

0.05 to 0.08

2

0.75

18 - 20

8 to 8.25

-


Rotary Vacuum Filter Screen

Vacuum Filter Divisional Stripe Screen

Zig Zag Brass & S.S. Vacuum Filter Screen

Brass Oblong Screen

Brass Round Hole Screen

Brass Wire Netting Screen

Brass Supporting Corrugated

Copper Oblong Screen

Copper Round Hole Screen

S.S. Plain Wire Mesh

S.S. Supporting Stabbed Hole

S.S. Dovex Screen

Expanded Metal

Nickel Screen

Lock Lap Screen



Thickness

Conical Round Hole (550 HPSI)

Elongated / Oblong Hole

in mms

in inches

Brass

Copper

Brass

Copper

S.S. 304

0.40

27G

0.254

0.264

0.234

0.244

0.222

0.45

26G

0.286

0.297

0.264

0.274

0.250

0.50

25G

0.318

0.330

0.293

0.305

0.277

0.55

24G

0.349

0.363

0.322

0.355

-

0.61

23G

0.387

0.403

0.358

0.372

-

0.71

22G

0.451

0.69

0.419

0.433

-

0.81

21G

0.514

0.535

0.475

0.493

-

To Calculate Square feet of each sheet size:
Total Square feet in MM: Width in mm x length in mm / 92903.04
Total Square feet in inches: Width in inch x length in inch / 144
Note: 2% to 3% of TOllerance shall be accepted



Most Important Sugesstions:

All Screen for Centrifugal machines manufactures of costly metal, variation of thickness directly affects its pricing, consumption, durability, labour cost & economy of Sugar Mills. To avoid this pilferage and procurement of quality screens consider our suggestions as under:

  1. Prefer to purchase copper/brass screens at rate per kg. basis instead of per price basis and verify thickness from weight chart.
  2. For durability and better results brass screens should be of 63 Cu:37 Zn alloy and copper screens should be of 99.9% purity
  3. Stainless Steel Screens should be of SS 304 Grade as specified in the vacuum filter screens specifications.